CO2/Carbon Dioxide Controller with Dual-Beam Ndir Sensor for Greenhouse and Indoor Plant

Product Description

Product Description

AGc12, a Wall Mount CO2 monitor and controller with Integrated Sensor, measures the CO2 level ranging from 0 to 5,000 ppm.
By using built-in Dual Beam NDIR technology and Day/Night auto detect sensor, it could monitor and control other connected devices, such as CO2 generator to help increase plant yields by supplying CO2 required for photosynthesis.
It is a perfect tool for agricultural applications like greenhouse/ hydroponics rooms, plant factories with two independent socket for Greenhouse mode and Vent mode.

Basic Info.

Model NO.	AGc12	Buzzer Sound	70dB @10cm
Trademark	OEM/ODM	Power Source	AC 100 ~ 240 VAC
Sensor Type	Dual-Beam NDIR	Origin	China KunShan
CO2 Range	0~5000ppm	HS Code	9027100090
Display Type	LCD	Production Capacity	80000 Pieces/Year
Photo Cell	Auto detect Day/Night	Transport Package	Carton
Sensor Unit Size	153*33*27mm   (6.0*1.3*1.1inch)	Package Type	1 pcs/Color Box
Socket Unit Size	195*145*44mm195  (7.7*5.7*1.7inch)	Weight	700g ( 24.7oz)

Feature:

Ø  Dual Beam NDIR (Non-Dispersive-Infrared) technology is used to improve the long term stability.
Ø  CO2 controller; Tracer
Ø  Built-in Day/Night detect sensor 
Ø  Chart with variable time Zoom Levels
Ø  Foolproof "Hold Home" function
Ø  Good Zone display indicate  
Ø  2 independent socket for CO2 increase/decrease application   
 

Operating Instructions

LCD Display:


Trend Chart Zoom:

Below is a table that show the available Zoom Levels for all parameters CO₂, as well as the duration of each division for corresponding Zoom Levels:

Auto Detect Day/Night:

The built-in Photo-Cell sensor can automatically detect whether it is Day or Night.
In Greenhouse (Increase) mode it can override the CO₂ control and shut off the CO₂ generator by turning off the output power (CO₂ Equipment socket) during the night. Conversely, if the Photo-Cell detects light and the CO₂ level is low, the device will start the CO₂ generator by turning on the output power (CO₂ Equipment socket). 
In Vent (Decrease) mode, Photo-Cell status does not affect the output power (Exhaust Fan socket) ON or OFF.

Greenhouse (INCREASE) Control:

This CO₂ controller can be set for Green House mode application by S5 ADVANCE Mode setting, CO₂ Equipment socket  is on when CO₂ concentration is below Set Target Low, and off when CO₂ concentration is over Set Target Hi. For example, if the Set Target Low is 1000ppm, and the Set Target Hi is 1400ppm, the output power will shut off when CO₂ over 1400ppm,  and power on when CO₂ below 1000ppm.

Vent (DECREASE) Mode Control:

This CO₂ controller can be set for Vent mode application by S5 ADVANCE Mode setting.Exhaust Fan socket is on when CO₂ concentration is over Set Target Hi, and off when CO₂ concentration is below Set Target Low.

Specifications

Typical test conditions, unless otherwise specified:  Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meter

Measurement	Specification
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Designed For	Indoor use
Operating & Storage RH	0-95%, non-condensing
CO2 Measurement
Accuracy at 0~3000ppm	±50ppm or ±5% of reading, whichever is greater
Accuracy over 3000ppm	±7%
Repeatability	20ppm at 400ppm (standard dev. of 10 readings in 1 minute)
Measurement Range	0-5000ppm
Display Resolution	1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)
Temp Dependence	±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence	0.13% of reading per mmHg (corrected by user's altitude input)
Response Time	<2min for 63% of step change or <4.6min for 90% step change
Warm-up Time	<30 sec
Power Input/Output	AC 120VAC, 60Hz,  Current: 10A Max
Mains Supply Voltage	Fluctuations up to ±10% of the nominal voltage
Applicable Pollution	Degree of the intended environment (POLLUTION DEGREE 2)
Dimension	Socket Unit: 115*45*38 mm   (4.5*1.8*1.5inch) Control Unit: 195*145*44mm   (7.7*5.7*1.7inch)
Weight	760g ( 26.8oz)

 

Application

As the primary substrate for photosynthesis, elevated CO2 concentration in the atmosphere significantly influences plant growth and productivity in many crop species, especially in C3 crops where the CO2 saturation point is much higher than the current atmospheric CO2 levels.

 

Smart CO2 Controller
Please pay attention to the CO2 gas concentration in the target room, the high concentration of CO2 gas has the risk of suffocation.

"Fresh" air ventilation is important because it can dilute contaminants that are produced in the indoor environment, especially in public places such as bars,library  and restaurants, ventilation needs to be ensured to maintain low levels of CO2 concentration.

 

 

 

About Us

KUNSHAN AST Optoelectronics CO., LTD designs, develops and manufactures high quality and affordable electronic device.


We are ISO 9001 certified ODM/OEM company, we cooperate with many world-renowned brand companies, and our products are sold to many countries and regions around the world and have received high recognition. These countries and regions include the United States, Germany, the United Kingdom, Thailand, Sweden, Argentina, Spain, Indonesia, Vietnam, Japan, Chinese Taiwan, the Netherlands, Australia, New Zealand, Austria, Canada, etc.

We have a strong independent research and development team, capable of independently designing products and possessing numerous product patents. We not only provide systematic solutions for various industries but also offer product design and OEM/ODM services to our customers.

Our team is committed to the research and development of infrared measurement.Especially in the field of NDIR gas measurement, our team has 15 years of development experience, and professional engineering development experience allows us to continue to receive high praise from customers.


Our engineers design our products while keeping the following goals in mind: to ensure the highest level of quality, accuracy, our design team strives to improve the competitive edge of our products to help you develop a broader market.


We continue to invest and improve in research and development, automatic calibration equipment, and automatic testing equipment, so that we can better serve and meet the expectations of our global partners. Mutual benefit and win-win with partners.
You're always welcome to reach out to us and pick out the products that catch your eye.