CO2 Monitor and Controller for Agriculture Green House with Ndir CO2 Sensor

Product Description

Product Description

Product Description:
As CO2 monitor and controller with Integrated Sensor, the Wall Mount CO2 Controller AGc06, measures the CO2 level up to 5,000 ppm.
By using built-in Dual Beam NDIR technology and Day/Night auto detect sensor, its relay output could control the other connected devices, such as CO2 generator to produce in a greenhouse when the CO2 concentration is below to help increase plant yields by supplying CO2 required for photosynthesis.
It is perfect used in agricultural applications like greenhouse/ hydroponics rooms, plant factories with both audible and visual alarms.

Basic Info.

Model NO.	AGc06	Buzzer Sound	70dB @10cm
Trademark	OEM/ODM	Power Source	AC 100 ~ 240 VAC
Sensor Type	Dual-Beam NDIR	Origin	China KunShan
CO2 Range	0~5000ppm	HS Code	9027100090
Display Type	LCD	Production Capacity	80000 Pieces/Year
Photo Cell	Auto detect Day/Night	Transport Package	Carton
Unit Size	166*75*33mm	Package Type	1 pcs/Color Box
Output	Piggyback 100~240VAC	Weight	502g ( 24.7oz)

Feature:
≡ Dual Beam NDIR (Non-Dispersive-Infrared) technology is used to improve the long term stability.
≡  CO2 controller; Tracer
≡  Built-in Day/Night detect sensor 
≡  Chart with variable time Zoom Levels
≡  Foolproof "Hold Home" function
≡  Good Zone display indicate  
≡  Green backlight    
 

Parameters

LCD Display:

Trend Chart Zoom:
Below is a table that show the available Zoom Levels for all parameters CO₂, as well as the duration of each division for corresponding Zoom Levels:

Multiple Mode Options

Auto Detect Day/Night
The built-in Photo-Cell sensor can automatically detect whether it is Day or Night.
In Greenhouse (Increase) mode it can override the CO₂ control and shut off the CO₂ generator by turning off the output power (CO₂ Equipment socket) during the night. Conversely, if the Photo-Cell detects light and the CO₂ level is low, the device will start the CO₂ generator by turning on the output power (CO₂ Equipment socket). 
In Vent (Decrease) mode, Photo-Cell status does not affect the output power (Exhaust Fan socket) ON or OFF.

Greenhouse (INCREASE) Control
This CO₂ controller can be set for Green House mode application by S5 ADVANCE Mode setting, CO₂ Equipment socket  is on when CO₂ concentration is below Set Target Low, and off when CO₂ concentration is over Set Target Hi. For example, if the Set Target Low is 1000ppm, and the Set Target Hi is 1400ppm, the output power will shut off when CO₂ over 1400ppm,  and power on when CO₂ below 1000ppm.

Vent (DECREASE) Mode Control
This CO₂ controller can be set for Vent mode application by S5 ADVANCE Mode settingExhaust Fan socket is on when CO₂ concentration is over Set Target Hi, and off when CO₂ concentration is below Set Target Low


 

Specifications

Typical test conditions, unless otherwise specified:  Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meter

Measurement	Specification
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Designed For	Indoor use
Operating & Storage RH	0-95%, non-condensing
CO2 Measurement
Accuracy at 0~3000ppm	±50ppm or ±5% of reading, whichever is greater
Accuracy over 3000ppm	±7%
Repeatability	20ppm at 400ppm (standard dev. of 10 readings in 1 minute)
Measurement Range	0-5000ppm
Display Resolution	1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)
Temp Dependence	±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence	0.13% of reading per mmHg (corrected by user's altitude input)
Response Time	<2min for 63% of step change or <4.6min for 90% step change
Warm-up Time	<30 sec
Power Input/Output	AC 120VAC, 60Hz,  Current: 10A Max
Mains Supply Voltage	Fluctuations up to ±10% of the nominal voltage
Applicable Pollution	Degree of the intended environment (POLLUTION DEGREE 2)
Dimension	166*75*33mm
Weight	502g ( 26.8oz)

 

Working Principle & Advantages

 

 

About Us

        KUNSHAN AST Optoelectronics CO., LTD designs, develops and manufactures high quality and affordable electronic device, especially in the field of NDIR gas measurement, our team has 15 years of development experience.

        We are ISO 9001 certified ODM/OEM Company, we cooperate with many world-renowned brand companies, and our products are sold to more than 20 countries around the world, mainly the U.S.A, Europe and Japan. Our engineers design our products while keeping the following goals in mind: to ensure the highest level of quality, accuracy, our design team strives to improve the competitive edge of our products to help you develop a broader market.

        Our team is committed to the research and development of infrared measurement. Especially in the field of NDIR gas measurement, our team has 15 years of development experience, and professional engineering development experience allows us to continue to receive high praise from customers. We continue to invest and improve in research and development, automatic calibration equipment, and automatic testing equipment, so that we can better serve and meet the expectations of our global partners. Mutual benefit and win-win with partners.